What’s Next?
- An email and phone call from one of our representatives.
- A time & cost estimation.
- An in-person meeting.
In the world of consumer electronics repair, few things are as frustrating as holding a non-functional board with no roadmap. For technicians and hobbyists alike, the search query has become a digital cry for help. This string of characters points to a specific, often elusive power supply or controller board found in a range of LCD televisions, monitors, and industrial displays.
| Pin | Name | Description | Typical Voltage | |-----|------|-------------|-----------------| | | VIN | Input voltage (4.5 – 38 V) | – | | 2 | GND | Ground (common) | 0 V | | 3 | SW | Switching node (connects to the internal MOSFET) | Pulses between VIN and GND | | 4 | FB | Feedback (fixed internally for 5 V/12 V; external for adjustable) | ≈ 0.6 V (reference) | | 5 | EN | Enable pin (active‑high). Pull high to turn on; pull low to shut down. | 0 V or 3.3 V | | 6 | SS | Soft‑start control (optional). Usually left unconnected; pulling low reduces inrush current. | – | | 7 | TEMP | Internal temperature sensor (not usually accessed). | – | jymc220bi schematic full
This board is a Pulse Width Modulation (PWM) DC motor speed controller. It converts AC input (typically 220V or 110V depending on the specific sub-model) into a variable DC output to drive the lathe’s permanent magnet motor. Regulates the RPM of the spindle motor. In the world of consumer electronics repair, few
Features a current-limiting circuit to prevent motor burnout. | Pin | Name | Description | Typical
Most JYMC boards feature small, adjustable blue or white potentiometers soldered directly to the board to fine-tune operations. Be very careful adjusting these while the board is live:
The board is designed for precision control under varying loads. Common ratings include: : 115V AC or 230V AC (model dependent).